klionblock.blogg.se - Schaller wraparound bridge

10-16 inch, depending on the setting of the rollers more outside or inside), minimal G/d string height above body 12,5mm, maximum string gauge 52, weight 58g (90g with accessories), for lefty: yes, but note the built-in angle and position of the intonation screws.Ģ press-in bushings M7 with 2 height-adjustment screws M5 (metric).įor other press-in bushings and height-adjustment screws please see under Bridges/ Replacement Kits and order additionally. (*Les Paul is a protected trademark owned by Gibson Musical Instruments Corporationīigsby is a protected trademark owned by Fred Gretsch Enterprises).ĭistance height adjustment screws 74 - 74,5mm, string spacing E-e 48,5 - 57,5mm, string spacing individual 9,7 - 11,5mm, string radius 12“-14" (usable for fretboard max. Reverse: intonations screws show to the tailpiece

Non-reverse: intonations screws show to the pickups If you want to exchange an existing wraparound bridge for a Schaller Signum bridge, please first check all the technical details on your guitar in advance.Si. Slant angle to be determined by guitarmaker based on scale length and string gauge. Low-friction roller saddles for excellent tuning stability – perfect for Bigsby™* vibratosĬomes with 2 different type saddle rollers to suit tone and string bending requirements: wide flat rollers for low strings and tight U-shaped for high strings. If you order more than one item from us we’ll ship all the items together in the most cost effective way and refund you the difference.Compatible with post spacings from 74.0 - 74.5 mmĪdjustable for height, intonation and string spacing

Metric 8 mm bridge posts and body anchors/bushings.

Rectangular ball end retainers stop string ends unwinding.

Two sets of bridge post intonation screws included for perfect bridge placement.

Individually intonatable saddles with large 9 mm travel range.

Wrap-around bridges combine the tail-piece and bridge into a single piece. You can still see the wrap-around bridge being used on some Les Paul models today such as the Junior and Special.

Machined brass saddles shaped for the best string break angle of the bridge The wrap-around bridge is an older design compared to the tune-o-matic bridge and has a simpler construction.

With its sleek design and unique construction details Signums G/D string height above body can be.

Locking posts keep the bridge level and ensure maximum sound transmission to the body Introducing the all new Schaller Signum locking bridge.

Gorgeous bridge design and supremely comfortable against the hand.

The bridge is supplied with metric 8 mm threaded locking posts and body anchors/bushings. The strings thread through the bridge from the front and the ball end retainers in the bridge are rectangular shaped so that the ball end cannot rotate in the bridge and untwist the end of the string.

The saddles are machined brass and shaped to provide the best string break angle over the bridge, in addition to individually intonatable saddles the Signum bridge has allen/hex screws behind the bridge posts that can be adjusted to move the whole bridge backwards and forwards and also slant it to add more intonation room to heavy bass strings, there are two sets of allen/hex screws included (6 mm and 10 mm long) to ensure the perfect bridge placement. To use the locking posts simply adjust the bridge height as normal then use the included tool to tighten the locking nut from below against the bridge, this keeps the bridge level and ensures maximum sound transmission to the guitar body.

The Schaller Signum bridge is a gorgeous wrap around tailpiece with individually intonatable saddles and locking bridge posts.